How to repair and care for automotive wheel bearings?

May 23,2024


Wheel bearings are responsible for reducing the friction resistance when the chassis is running and maintaining the normal driving of the car. If the wheel bearing fails, it may cause noise, bearing heat and other phenomena, especially the front wheel is more obvious, easy to lead to the direction of loss of control and other dangerous phenomena. Therefore, wheel bearings must be maintained on a regular basis.
    1. Inspection of wheel hub bearing
    (1) Check the tightness of the wheel hub bearings, first of all, the car will be inspected wheel hub end of the wheel axle set up, with the support of the car stool, cover the car wood and other appliances to the car safely set up.
    (2) Turn the inspected wheel several times by hand to see whether the rotation is smooth and whether there is abnormal noise. If the rotation is not smooth and friction sound, brake part is not normal; if there is no noise, the rotation is not smooth and tight and loose, that the bearing part is not normal. The hub should be disassembled and inspected if any of the above irregularities occur.
     For small cars, when checking wheel bearings, hold the upper and lower sides of the tire with both hands, wrench the tire back and forth with both hands, and repeat several times. If it is normal, there should be no feeling of looseness and obstruction; if there is a clear feeling of looseness in the swing, the hub should be disassembled and inspected.
    (3) Inspection on braking. Usually in the inspection of wheel bearings, incidental inspection of the wheel braking device, if the inside of the tire has oil stains, it is likely to be caused by the brake sub-pump or brake pipe leakage, should promptly identify the cause, be excluded.